How to Get Rid of Slippery Floors
Slapstick jokes about slipping and falling have been around for a long time. These mishaps, on the other hand, are not amusing. Over a million Americans have visited the emergency room due to slipping incidents, which account for 12% of all fall injuries. Sprains and fractures can occur, as well as traumatic brain injuries that can result in permanent impairment or, in the worst-case scenario, death.Â
How to Get Rid of Slippery Floors
Slip and fall accidents are costly, in addition to being a health danger. In 2012, compensation claims and medical expenditures resulting from these incidents totalled $19 billion. They are also the most common reason for missing work, accounting for 85 per cent of all workers’ compensation costs. And what is the leading cause of these mishaps? The floors are too slippery.
The Most Common Sources of Slippery Floors
The Most Common Sources of Slippery Floors
There are several causes of slippery floors, however, the following are the most common:
1. Moisture
2. Grease
3. Talcum powder or dust
4. An excessive amount of floor polish or wax.
5. Wet floors
6. Cleaning and/or polishing chemicals incompatible with your floor type.
Slippery Floors: How to Get Rid of Them
Proper maintenance and cleaning practices will keep your employees and customers safe. Here are a few of the most commonly recommended methods for removing slick floors:
1. Always keep the floors dry –Â How to Get Rid of Slippery Floors
Immediately wipe away any indication of wetness on your floors. A dripping area or sweating on the floor (due to humidity) are a recipe for disaster.
2. Degrease Typically Oily Areas with a Degreasing Agent
Oil is more concentrated in some areas, such as the kitchen and garage flooring. Simple mopping with water and a dry mop will not suffice on these surfaces. Choose a degreasing chemical appropriate to the sort of flooring you have.
3. Use the Correct Cleaner and Polish –Â How to Get Rid of Slippery FloorsÂ
Applying the wrong chemicals could result in a slippery coating forming on the floor. Make sure the cleaners and polishes you use are specifically designed for your flooring type. Tip: Apply the agent to a small section of your flooring in the same manner as you would the remainder of the floor area, then test the surface for slipping.
4. Thoroughly clean the floors –Â How to Get Rid of Slippery Floors
Moisture, wax, oil, soap, talcum, and dust can cause a slippery floor. To assure that the floors are safe, thoroughly clean all surfaces.
5. Always mop with a dry mop. Following the cleaning and polishing
Your mops may collect grease, soap, and moisture. After cleaning, reusing the same mop results in the formation of a layer of grease, soap, and moisture. As a result of this, the floors become slippery. Use a different dry mop for a last clean after cleaning your flooring. Also, thoroughly clean your mops to eliminate any residue stuck to them.
6. Invest in the Correct Matting for a Variety of Workspace Areas
Different mats are made for different applications. To reduce slips and falls in your company environment, ensure you have safe-mats installed throughout or get an antislip floor treatment.
Why should you get an antislip floor treatment?
Making non-slip flooring, especially in public and workplaces, must be part of a risk prevention strategy and is at the same time a sign of courtesy and attention to others.
Get the right service for your floor!
Does it sound too complicated? Don’t worry – we’ll take the guessing out of your hands! Our floor care consultants here at Anti-Slip Malta will assist you in getting the most effective mats for your flooring. Leave us a message, and we’ll make your floor non-slippery, safe, and accident-free!
